PDA

View Full Version : first logo


preacher
February 6th, 2003, 02:33 PM
if i can get it to show up :) anybody know of a good tut on forums :P anyway , comments bad or good if you please




logo (http://www28.brinkster.com/gruv64/newsite2/logotry.html)
redViper
February 6th, 2003, 02:40 PM
for your first logo, its pretty good.
i like the colors, orange and blue go well together
and the little design in the center is very cool
but i think you went a little overboard in making it 3D'ish that it deminishes the quality of it. Like the text with the 3d on it makes it look small and squishy, and you can hardly make out what it says
and as everyone on these forums have said, try makin it smaller, if it goes smaller without being all weird and stuff, then you've got a good logo, it should be able to work at any size
mdipi
February 6th, 2003, 02:58 PM
it looks good but bring it down to 50x50 and see how it looks then, can you still read the text and see the details? if so then it is good, if not then back to the drawing boards my man. also, the scan lines dont look all that great...
redViper
February 6th, 2003, 03:02 PM
Originally posted by mdipi.com
it looks good but bring it down to 50x50 and see how it looks then, can you still read the text and see the details? if so then it is good, if not then back to the drawing boards my man.

didn't i just say that?
:P
mdipi
February 6th, 2003, 03:35 PM
opps...forgot to refresh...mybad...
redViper
February 6th, 2003, 03:37 PM
its cool, just dont let it happen again!
8]
mdipi
February 6th, 2003, 03:50 PM
lol ok~!
redViper
February 6th, 2003, 04:00 PM
:shakes fist:

(-:
preacher
February 6th, 2003, 04:37 PM
does anyone have any suggestions or somewhere i can look ? i see what ya mean by the resizing and all but how can u get it that small and still read it :chinaman:
also thanks for the quick replies. i did away with the 3d look and changed lettering around and you were right it looks alot better and when i resize it , it doesnt look like a "glob" :) but u can't read the letters
eyeinfinitude
February 6th, 2003, 06:13 PM
That logo has too many complex details that isn't going to hold at a smaller size. The scanlines will be gone, there is no way that type of font will hold and be readable. Embossed text will never hold when rescaled so keep that in mind.

As for the logo itself, I remember seeing that design many times before so you might want to change it up a bit. Good luck. =)
RenaissanceGirl
February 6th, 2003, 06:45 PM
A good test to see if you have a solid logo is to place it in a two color setting... black and white being the best so you can also get an idea what it might look like when faxed over.

Like this:
preacher
February 7th, 2003, 12:31 AM
cool thanks, you guys are really helpful on here !! i have learned alot from these forums but still have a long ways to go :beam:
so anyway thanks for all the tips and i guess i'll be buggin yall again soon ;)
preacher
February 7th, 2003, 12:33 AM
oh ya and i got the idea for middle design from a show on the history channel about crop circles :) lmao they had some really awesome designs on it :geek: